Deep Blue Delay Clone

  • Model: K109

 Ask a Question 


Add to Cart:
"A much sought after modern delay pedal. Deep Blue Delay (DBD) is a natural sounding digital/analog delay, with analog direct signal path. The DBD has about the same bandwidth as the classic tape echo units, and it can be used in front of an amplifier or in amplifier effects loops."

A kit of components as recommended by Ivlark for assembly of the "Mad Professor Deep Blue Delay with Mods" stripboard project.
NOTE - these kits are not intended for beginners, so the ability to identify components and values from their markings and to transfer a pictorial layout to physical stripboard is assumed. No written instructions are provided with the kit.
Latest assembly guides and layout are available here.

Manufacturers and product names are mentioned solely for circuit identification and comparison, and where applicable the trademarks are the property of their respective owners who are in no way associated or affiliated with Bitsbox. No cooperation or endorsement is implied.

Kit Contents:
  • Resistors:
    • 1x 33R Metal Film Resistor 1/4W 1%
    • 2x 1k Metal Film Resistor 1/4W 1%
    • 1x 2k Metal Film Resistor 1/4W 1%
    • 1x 2k7 Metal Film Resistor 1/4W 1%
    • 7x 10k Metal Film Resistor 1/4W 1%
    • 2x 5k1 Metal Film Resistor 1/4W 1%
    • 2x 20k Metal Film Resistor 1/4W 1%
    • 1x 22k Metal Film Resistor 1/4W 1%
    • 1x 180k Metal Film Resistor 1/4W 1%
    • 1x 100k Metal Film Resistor 1/4W 1%
    • 1x 360k Metal Film Resistor 1/4W 1%
    • 1x 1M Metal Film Resistor 1/4W 1%
  • Capacitors:
    • 2x 2.2nF Multilayer Ceramic
    • 1x 10nF Multilayer Ceramic
    • 2x 100nF Multilayer Ceramic
    • 1x 47pF Ceramic Disc
    • 1x 100pF Ceramic Disc
    • 1x 15nF Polyester Film
    • 1x 22nF Polyester Film
    • 1x 100nF Polyester Film
    • 1x 22nF Polybox
    • 1x 47nF Polybox
    • 1x 100nF Polybox
    • 1x 4.7nF Polybox
    • 4x 1uF 50V Electrolytic
    • 3x 47uF 16V Electrolytic
    • 1x 100uF 16V Electrolytic
  • 1x 78L05 5V 100mA Voltage Regulator TO92
  • 1x OP275 Audio Op Amp
  • 1x PT2399 Echo Processor
  • 3x 50k lin 16mm Potentiometer
  • 1x 22k lin 16mm Potentiometer
  • 1x 64x95mm Stripboard
  • 1x 3PDT Footswitch
  • 1x 2.1mm DC Chassis Socket
Note: Obsolete or non-standard value components will have been replaced by currently available recommended substitutes or standard European equivalent values - more information available via the blog here.

To complete your project you might be interested in:

Wire diecast box jack socket control knobs switch
Your IP Address is:
Copyright © 2024 Bitsbox. Powered by Zen Cart