M087
Charger module for 3.7V lithium power (LiPo) packs which do not include their own protection circuit. Feeds a 1A charge current to the battery and...
£1.00
Add:
ST071
Triaxial accelerometer and gyroscope with 6 degrees of freedom. I2C serial interface. 5Vdc supply voltage - Arduino friendly. Applications available...
£2.75
... more info
M131
A third-party development board using the Raspberry Pi RP2040 chip, but with upgraded features compared to the official Raspberry Pi Pico. Features:...
£3.41
Add:
M128
The infrared emitting diode of the TCRT5000 sensor continuously emits an infrared beam. When the beam is reflected back with sufficient intensity (by...
£1.12
Add:
M088
2-channel H-bridge motor driver board able to drive two independent motors at up to 800mA each. Can also drive a single four line two phase stepper...
£1.13
Add:
M034
PIR motion sensor with high/low TTL 3.3V output signal. Sensitivity (up to 7m) and output duration (20s - 5min approx.) adjustable. 5V - 20V DC...
£1.82
Add:
M033
A low cost, accurate I2C real-time clock. with an integrated 32K AT24C32 EEPROM. Supply voltage 3.3 V to 5.5 V A coin cell battery holder allows...
£2.38
Add:
M069
PIR motion sensor with operating in the 2.7V to 12Vdc supply range. Sensitivity 3-5m with output low to high for 2 secs on detection of motion....
£1.58
Add:
ST096
Doppler effect motion sensor using microwave radar signals. Detection range up to 7m. Can detect motion through many materials. Wide 4-28Vdc supply...
£1.46
Add:
MTR8
Motor voltage range 3-12Vdc (5V-9V recommended). 70-250mA Motor & gearbox dimensions 70 x 22 x 18mm approx. 70-140 rpm approx. Torque 1kgf.cm approx....
£2.28
Add:
M085
Motor driver shield for Arduino - compatible with the Adafruit motor driver library. The board includes two L293D motor drivers and one 74HC595 shift...
£2.62
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.77
Add:
M055
"Digital Tube" display module - 0.36" This module uses a two pin serial interface to accept display data to the onboard TM1637 IC. Customer Chris...
£1.57
Add:
PCB013
Prototyping double-sided pad board fits the Wemos D1-Mini wi-fi board headers.
£0.52
Add:
M116
The W1209 thermostat is a compact and versatile digital temperature controller designed for controlling heating or cooling systems based on...
£2.84
Add:
M062
USB-to-Serial converter based on the CP2102 chip. For debugging, firmware updating and general serial communications. Connects to PC via micro-USB...
£1.99
Add:
M102
Asynchronous serial data transfer interface module.. Connects to PC via mini-USB socket. The 6-pin right angle pin header connects DTR, RX, TX, Vcc,...
£2.68
Add:
M035
A module for detecting moisture levels in soil. Ideal for experimenting with automatic watering systems and alarms. Consisting of a resistive...
£1.00
Add:
M057
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. Depending on current stock, this module may not have the header pins...
£4.63
Add:
M008
In-circuit programmer for AVR microcontrollers. Linux, Mac OSX and Windows compatible. Supplied with 10-way IDC lead.
£3.62
Add:
M061
Break out the Nano I/O to screw terminals. Nano pins push fit into central female headers. Board provided as a kit so soldering assembly is required....
£1.46
Add:
M009
Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£6.76
Add:
M022
In-circuit programmer for AVR microcontrollers. Supplied with 6-way IDC lead for connection to the target. USB powered. Jumper in place sends 5V to...
£6.42
Add:
M048
This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£5.82
Add:
M072
Ethernet network adaptor module based on the ENC28J60 chip. SPI interface. 3.3V supply. Arduino compatible using a variety of available libraries...
£5.02
Add:
M119
The WCH-LinkE is a powerful debugging and programming tool designed for RISC-V and ARM-based microcontrollers. Ideal for both hobbyists and...
£5.59
Add:
M042
Enables interaction between different logic levels in the same system e.g. send 5V logic signals to 3.3V tolerant inputs. Signals can pass in both...
£0.47
Add:
M123
An 8 channel level shift module based on the TXS0108E integrated circuit. Enables high speed interaction between different logic levels in the same...
£0.82
Add:
M078
Real time clock (RTC) module based on the PCF8563. 400kHz I2C bus communications. Provides year, month, day, weekday, hours, minutes, and seconds...
£1.39
Add:
M125
The MonkMakes Amplified Speaker 2 is an easy to use amplified speaker on a circuit board. The board needs a 3.3 to 6V power supply that can be...
£9.60
Add:
