OP046
RED common cathode.
£1.37
Add:
OP045
RED common anode.
£1.10
Add:
OP042
Water clear lens. Built-in oscillator circuit provides a flash at approximately 1.5Hz. High brightness 1560mcd Vdd=5V-6V I=20mA
£0.35
... more info Sold Out
OP041
Right Angled PCD mount 5mm LED. 32mcd 2.2Vf lfmax=25mA
£0.45
Add:
OP040
Right Angled PCD mount 5mm LED. 32mcd 2.0Vf lfmax=30mA
£0.28
Add:
OP033
Water clear lens. 4500mcd 3.2Vf lfmax=25mA. Lead length 28mm max.
£0.30
Add:
OP031
Water clear lens, 1120mcd 2.1Vf lmax=20mA
£0.19
Add:
OP030
47mcd 2.4Vf lfmax=20mA
£0.11
Add:
OP029
Water clear lens. 50mcd 2.1Vf lfmax=20mA
£0.26
Add:
OP028
Very high brightness water clear lens. 12000mcd min. 3.2Vf 20mA. 50% power angle 15deg. Lead length 28mm max.
£0.25
Add:
OP027
Very high brightness water clear lens. 30000mcd min, 3.6Vf typical, 100mA max. 50% power angle 15deg.
£0.68
Add:
OP026
Vf=2.5Vmax lf=25mA. Diffused lens.
£0.36
Add:
OP024
Vf=2.5Vmax lf=25mA. Diffused lens.
£0.40
Add:
OP020
10 Segment bargraph. 10 leds in a single package with individually accessible anodes and cathodes. Standard 0.1" pin pitch.
£0.72
Add:
OP016
3mm Standard Brightness LED 50mcd 1.9Vf lfmax=20mA. Lead length 18mm max.
£0.10
Add:
OP015
3mm Standard Brightness LED 38mcd 2.5Vf lfmax=20mA. Lead length 18mm max.
£0.10
Add:
OP014
Water clear lens. 476mcd min typically 1900mcd at 20mA. 1.95Vf-2.4Vf lfmax=30mA. Lead length 28mm max.
£0.18
Add:
OP013
Water clear lens. 476mcd min typically 1900mcd at 20mA. 1.95Vf-2.4Vf lfmax=30mA. Lead length 28mm max.
£0.29
Add:
OP009
3mm Standard Brightness LED 65mcd 1.9Vf lfmax=20mA. Lead length 18mm max.
£0.10
Add:
OP007
RED common cathode.
£0.40
Add:
OP004
5mm Standard Brightness LED 36mcd 2.0Vf lfmax=20mA. Lead length 18mm max.
£0.10
Add:
OP003
5mm Standard Brightness LED 47mcd 2.1Vf lfmax=20mA. Lead length 18mm max.
£0.10
Add:
OP002
5mm Standard Brightness LED 65mcd 1.9Vf lfmax=15mA. Lead length 18mm max.
£0.10
Add:
M093
ESP8266 WiFi development board compatible with the Arduino IDE and with NodeMCU. Breadboard-compatible. 11 digital and one analogue I/O. The I/O pins...
£3.62
Add:
M087
Charger module for 3.7V lithium power (LiPo) packs which do not include their own protection circuit. Feeds a 1A charge current to the battery and...
£1.00
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.77
Add:
M065
Input 8V - 36Vdc. Output 1.25V-32Vdc Constant max. output current can be varied up to 5A. 75W max. NOTE: To ensure correct current regulation and...
£2.54
Add:
M038
Based around the ESP8266 ESP-12 and NodeMCU firmware this module provides an integrated Arduino-like hardware platform for developing wifi IoT...
£5.64
Add:
M024
Mounts on the rear of the 1602 & 2004 compatible LCD module to provide an I2C interface. Reduces the number of I/O pins required to drive the LCD to...
£1.13
Add:
