M038
Based around the ESP8266 ESP-12 and NodeMCU firmware this module provides an integrated Arduino-like hardware platform for developing wifi IoT...
£5.64
Add:
OP079
Water clear lens. Built-in oscillator circuit provides a flash at approximately 1.5Hz. High brightness 3000mcd Vdd=5V-6V I=20mA
£0.37
Add:
K138
Everyone's first project! The Flashing LED Project on mini breadboard - requires no soldering. Ideal for beginners and, of course, the components can...
£2.74
Add:
K100
Everyone's first project - flash a LED. Should be powered by a 9V PP3 battery - see the battery section. If you require wire - see the cable section....
£1.88
Add:
OP042
Water clear lens. Built-in oscillator circuit provides a flash at approximately 1.5Hz. High brightness 1560mcd Vdd=5V-6V I=20mA
£0.35
... more info Sold Out
K136
General hardware pack for FX pedal building. Pack contents: 1 x DC Jack Socket (CN306) 1 x Stereo Input Jack Socket (CN141) 1 x Mono Output Jack...
£12.78
Add:
OP180
10 Segment bargraph - 5xGreen, 3xYellow, 2xRed leds in a single package with individually accessible anodes and cathodes. Standard 0.1" pin pitch....
£1.12
Add:
OP085
10mm Standard Brightness LED 47mcd 2.4Vf lfmax=25mA
£0.20
Add:
OP163
3mm Kingbright L-34GD LED 32mcd 2.2Vf lfmax=25mA. Lead length 28mm max.
£0.18
Add:
OP015
3mm Standard Brightness LED 38mcd 2.5Vf lfmax=20mA. Lead length 18mm max.
£0.10
Add:
OP149
Kingbright L-7104LGD 3mm green LED. 2mcd brightness maintained down to 2mA forward current. Vf = 1.9V (2.5V max). If = 25mA max.
£0.17
Add:
OP172
Green 5mm standard brightness LED. 45mcd 2.2Vf lfmax=30mA. Lead length 28mm max.
£0.17
Add:
OP145
Kingbright L-7113LGD 5mm Green LED. 3.2mcd brightness maintained down to 2mA forward current. Vf = 1.9V (2.2V max). If = 25mA max.
£0.14
Add:
OP178
10 Segment bargraph. 10 leds in a single package with individually accessible anodes and cathodes. Standard 0.1" pin pitch. Vf=3.1 to 3.6V....
£1.09
Add:
OP030
47mcd 2.4Vf lfmax=20mA
£0.11
Add:
OP041
Right Angled PCD mount 5mm LED. 32mcd 2.2Vf lfmax=25mA
£0.45
Add:
OP126
10mm Super Bright Green LED with water clear lens. 30,000mcd 3.2Vf@20mA, Ifmax continuous=25mA, 30deg viewing angle. Ifpeak 100mA 0.1ms pulses, 1/10...
£0.29
Add:
CN323
Heavy duty metal body construction.
£1.33
Add:
OP108
Blue lens. 1000mcd 3Vf lfmax=20mA
£0.17
Add:
OP110
Water clear lens. 120mcd@20mA Vf=2V lfmax=30mA
£0.19
Add:
OP049
Blue lens. Typically 500mcd at 20mA. 3.0Vf lfmax=20mA. Lead length 18mm.
£0.16
Add:
OP014
Water clear lens. 476mcd min typically 1900mcd at 20mA. 1.95Vf-2.4Vf lfmax=30mA. Lead length 28mm max.
£0.18
Add:
OP013
Water clear lens. 476mcd min typically 1900mcd at 20mA. 1.95Vf-2.4Vf lfmax=30mA. Lead length 28mm max.
£0.29
Add:
OP068
Opto-sensor encoder. Used in conjunction with an infrared led, this device can sense speed and direction of mechanical motion.
£4.25
Add:
M024
Mounts on the rear of the 1602 & 2004 compatible LCD module to provide an I2C interface. Reduces the number of I/O pins required to drive the LCD to...
£1.13
Add:
K128
Create a continuity tester for any lead with up to 8 wires eg Ethernet patch leads, DIN audio leads, USB etc. NOTE: Connectors are not supplied -...
£5.56
Add:
K072
Project constructed on the supplied PCB. Red and green LEDs flash in a rotating pattern with the speed adjustable using a preset pot. Kit contains...
£5.95
Add:
OP133
Reliably space and support your LED above the PCB - for 5mm leds. 5mm diameter, 13mm long.
£0.11
Add:
OP113
Reliably space and support your LED above the PCB - 5mm leds. 5mm diameter, 9.85mm long.
£0.17
Add:
QU324
8-Digit LED display driver with serial interface. Drives common cathode led displays.
£8.55
Add:
