K140
Latching tap-responsive switch on mini breadboard - requires no soldering. Ideal for beginners and, of course, the components can be used over again....
£3.91
Add:
K092
"Mad Professor Sweet Honey Overdrive (SHOD) is a super touch sensitive medium gain overdrive pedal. It is designed to overdrive distorted amplifiers...
£18.64
Add:
OP027
Very high brightness water clear lens. 30000mcd min, 3.6Vf typical, 100mA max. 50% power angle 15deg.
£0.68
Add:
PCB017
Simplify effects pedal off-board wiring. Wire input and output jacks and main board direct to a central switching PCB carrying the true by-pass 3PDT...
£0.84
Add:
M014
Electret microphone with comparator circuit for sound detection. Power ON and sound detected LED indicators. Digital and analogue outputs....
£1.22
Add:
K119
"The venerable Clay Jones Overdrive gets the Lovepedal Eternity treatment by Fred Briggs. The ultimate mojo Tubescreamer gets a bit more mojo" A kit...
£18.83
Add:
K125
Specifically tuned to the sound of a block-buster 1979 album and emulates the "magic" 70's era fuzz pedal that was somehow clear and articulate on...
£17.15
Add:
ST042
Bourns PEC11R-4215K-S0024 24-step rotary encoder with normally open momentary push switch. Switch operation is by depression of the shaft. Body...
£2.03
Add:
CN222
RJ45 8/8 right angled. For computer and telecoms applications.. Adam Tech
£0.66
Add:
OP099
Vf=2-3Vmax lf=20mA 1200-2000mcd Water clear lens.
£0.22
Add:
OP100
Vf=2-3Vmax lf=20mA 1200-2000mcd Water clear lens.
£0.23
Add:
OP124
Vf=2.0-2.8Vmax lf=20mA 1200-2000mcd
£0.25
Add:
OP121
Vf=1.9-2.8Vmax lf=20mA 1200-2000mcd
£0.29
Add:
M017
Opto-isolated 10A Change-over Relay. On-board optocoupler circuit withrelay active led indicator. 3-way 0.1" pin header strip for 5Vdc supply and...
£2.00
Add:
OP040
Right Angled PCD mount 5mm LED. 32mcd 2.0Vf lfmax=30mA
£0.28
Add:
OP029
Water clear lens. 50mcd 2.1Vf lfmax=20mA
£0.26
Add:
OP135
Water clear lens, standard brightness. 35mcd 2.0Vf lfmax=20mA
£0.13
Add:
OP114
Red filter for leds and led displays. Overall dimensions 84mm x 30mm x 2mm 2mm recessed bevel around the edge to allow for mounting to a panel.
£0.86
Add:
OP020
10 Segment bargraph. 10 leds in a single package with individually accessible anodes and cathodes. Standard 0.1" pin pitch.
£0.72
Add:
OP144
Kingbright L-7113LID 5mm Red LED. 5mcd brightness maintained down to 2mA forward current. Vf = 1.7V (2.5V max). If = 30mA max.
£0.14
Add:
OP171
High efficiency 5mm standard brightness LED. 80mcd 2Vf lfmax=30mA. Lead length 28mm max.
£0.13
Add:
OP148
Kingbright L-7104LID 3mm Red LED. 3mcd brightness maintained down to 2mA forward current. Vf = 1.7V (2.5V max). If = 30mA max.
£0.15
Add:
OP009
3mm Standard Brightness LED 65mcd 1.9Vf lfmax=20mA. Lead length 18mm max.
£0.10
Add:
OP083
10mm Standard Brightness LED 45mcd 2.1Vf lfmax=30mA.
£0.19
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.77
Add:
K141
Micro-Tutor Uno – Arduino/Microcontroller coding and hardware activity board with prototyping area. Welcome to the world of microcontrollers! Our...
£23.28
... more info
QU324
8-Digit LED display driver with serial interface. Drives common cathode led displays.
£8.55
Add:
OP113
Reliably space and support your LED above the PCB - 5mm leds. 5mm diameter, 9.85mm long.
£0.17
Add:
OP133
Reliably space and support your LED above the PCB - for 5mm leds. 5mm diameter, 13mm long.
£0.11
Add:
K072
Project constructed on the supplied PCB. Red and green LEDs flash in a rotating pattern with the speed adjustable using a preset pot. Kit contains...
£5.95
Add:
