VR124
50k linear Alpha 9mm with knurled 6mm plastic shaft. For pcb mounting.
£1.05
Add:
VR126
250k linear Alpha 9mm with knurled 6mm plastic shaft. For pcb mounting.
£1.06
Add:
OP178
10 Segment bargraph. 10 leds in a single package with individually accessible anodes and cathodes. Standard 0.1" pin pitch. Vf=3.1 to 3.6V....
£1.09
Add:
OP045
RED common anode.
£1.10
Add:
OP180
10 Segment bargraph - 5xGreen, 3xYellow, 2xRed leds in a single package with individually accessible anodes and cathodes. Standard 0.1" pin pitch....
£1.12
Add:
M024
Mounts on the rear of the 1602 & 2004 compatible LCD module to provide an I2C interface. Reduces the number of I/O pins required to drive the LCD to...
£1.13
Add:
CN288
Pre-assembled leads of 1.8m in length, moulded-on power plug, stripped and tinned wires at the free end and moulded-on strain relief bush. Standard...
£1.18
Add:
M014
Electret microphone with comparator circuit for sound detection. Power ON and sound detected LED indicators. Digital and analogue outputs....
£1.22
Add:
HW058
3 x drilled fixing holes. 10.2 degC/W 34.5x38x12.5mm Twin 2.6mm diameter board location pins on 25mm centres.
£1.22
Add:
CN323
Heavy duty metal body construction.
£1.33
Add:
CN289
Pre-assembled leads of 1.8m in length, moulded-on power plug, stripped and tinned wires at the free end and moulded-on strain relief bush. Standard...
£1.35
Add:
OP105
RED 8x8 dot matrix display - common anode. Vf=1.9V, Ifmax=18mA
£1.36
Add:
OP046
RED common cathode.
£1.37
Add:
CN097
Fits cigar lighter socket. Includes an internal 3A fuse and LED power indicator
£1.38
Add:
PCB010
A PCB for creation of a customised, barebones, Arduino-compatible control module. This board, now in version 2.0, dispenses with the USB interface...
£1.44
Add:
M012
Powered by either a 6.5-12V dc supply or from USB, this module plugs into your breadboard and provides a selectable 3.3V or 5V to the power rails....
£1.52
Add:
OP138
Mounted on 20mm diameter star heatsink. Colour - Cold white 5000K - 5650K. Vf=2.85V-3.85V (3.3V typical). 350mA forward current. 120-155lm 130deg...
£1.56
Add:
OP123
Mounted on 20mm diameter star heatsink. Colour - Warm white 3300K. Vf=2.85V-3.85V (3.3V typical). 350mA forward current. 87-125lm 130deg viewing...
£1.58
Add:
HW009
Pre-drilled for TO3 package. 7.1 degC/W
£1.65
Add:
K100
Everyone's first project - flash a LED. Should be powered by a 9V PP3 battery - see the battery section. If you require wire - see the cable section....
£1.88
Add:
OP139
Mounted on 20mm diameter star heatsink. Colour - Cold white 5000K - 5650K. Vf=3.1V-4.1V (3.6V typical). 750mA forward current. 218.9-284.5lm 130deg...
£1.92
Add:
OP122
Mounted on 20mm diameter star heatsink. Colour - Warm white 3300K. Vf=3.1V-4.1V (3.6V typical). 700mA forward current. 130deg viewing angle....
£1.92
Add:
CN444
Panel mount XLR socket in glass filled nylon. Solder bucket terminals. 2x3.6mm screw holes.
£1.93
Add:
M017
Opto-isolated 10A Change-over Relay. On-board optocoupler circuit withrelay active led indicator. 3-way 0.1" pin header strip for 5Vdc supply and...
£2.00
Add:
ST042
Bourns PEC11R-4215K-S0024 24-step rotary encoder with normally open momentary push switch. Switch operation is by depression of the shaft. Body...
£2.03
Add:
CN445
Panel mount XLR plug in glass filled nylon. Solder bucket terminals. 2x3.6mm screw holes.
£2.51
Add:
M065
Input 8V - 36Vdc. Output 1.25V-32Vdc Constant max. output current can be varied up to 5A. 75W max. NOTE: To ensure correct current regulation and...
£2.54
Add:
OP112
1602A lcd module with blue LED backlight. Alphanumeric dot matrix. 32 characters over 2 lines. Display area 66x16mm. 5V supply voltage. 4x3mm fixing...
£2.72
Add:
OP096
1602 LCD Module Yellow/Green LED backlight. Alphanumeric dot matric. 32 characters over 2 lines. Display area 66x16mm. 5V supply voltage. Arduino...
£2.72
Add: