CN047
A set of ten 500mm crocodile clip test leads in 5 colours.
£3.13
Add:
CN012
Stainless steel sprung contact. 36A 60V rated.
£1.21
Add:
CN024
Panel Mount Accepts 4mm banana plug. Requires 8mm mounting hole.
£0.79
Add:
CN080
Panel mount. 15 Amp rated. For test equipment, power supplies, loudspeaker connection, etc. Accepts 4mm banana plug. Height:- 24-32mm above panel....
£1.39
Add:
CN255
Panel Mount - plastic bezel splits to provide isolation with metal panels. 7.7mm mounting hole. Accepts 4mm banana plug.
£0.25
Add:
CN275
Panel mount. 30Vac 60Vdc 19A max. Height 23mm above the panel. Accepts 4mm banana plug.
£0.82
Add:
CN184
Sprung hook for connection to component legs. Overall length is 40mm. 50V max.
£0.35
Add:
CN009
Overall length 35mm including insulating boot.
£0.20
Add:
CN050
Sprung hook for connection to component legs. Overall length is 57mm. 50V max.
£0.59
Add:
CN065
Panel Mount Accepts 4mm banana plug.
£0.61
Add:
CN191
Panel mount. 15 Amp rated. For test equipment, power supplies, loudspeaker connection, etc. Accepts 4mm banana plug. Height:- 24-32mm above panel....
£1.26
Add:
CN332
165mm x 55mm, 830 tie points. Self adhesive backing. Multiple boards can be locked together for larger prototyping areas. Compatible with the...
£2.27
Add:
CN236
Male/male. A set of 65 jumpers for use with the above breadboards. Prepared in 4 lengths with solid tips.
£2.35
Add:
M012
Powered by either a 6.5-12V dc supply or from USB, this module plugs into your breadboard and provides a selectable 3.3V or 5V to the power rails....
£1.52
Add:
CN438
Female/female. A set of 40 jumpers for connection between header pins. Supplied joined together in a peel apart strip.Length 10cm
£1.24
Add:
CN287
Female/female. A set of 40 jumpers for connection between header pins. Supplied joined together in a peel apart strip.Length 20cm
£1.44
Add:
CN369
Stainless steel sprung contact. 36A 60V rated.
£1.02
Add:
CN392
Panel Mount Accepts 4mm banana plug.
£0.72
... more info Sold Out
CN190
Panel mount. 15 Amp rated. For test equipment, power supplies, loudspeaker connection, etc. Accepts 4mm banana plug. Height:- 24-32mm above panel....
£1.38
Add:
CN397
Sprung hook for connection to component legs. Overall length is 40mm. 50V max.
£0.36
Add:
CN521
Male/male. A set of 140 pre-formed, U-shaped jumper wires for use with all of our breadboards. 13 different lengths of cut and stripped 22AWG...
£3.04
Add:
CN272
Male/female. A set of 40 jumpers for connection between header pins and a breadboard. Supplied joined together in a peel apart strip. Length 20cm
£1.68
Add:
CN429
Male/female. A set of 40 jumpers for connection between header pins and a breadboard. Supplied joined together in a peel apart strip. Length 10cm
£1.60
Add:
CN279
Male/male. A set of 40 jumpers for connection between sockets. Supplied joined together in a peel apart strip. Length 20cm
£1.94
Add:
CN416
Male/male. A set of 40 jumpers for connection between sockets. Supplied joined together in a peel apart strip. Length 10cm
£1.55
Add:
CN469
T-shaped 40-pin breadboard adaptor plate for Raspberry Pi. Connect the Pi 40-pin I/O port to a breadboard for prototyping. The board is marked with...
£1.53
Add:
CN011
Stainless steel sprung contact. 36A 60V rated.
£1.13
Add:
CN023
Panel Mount Accepts 4mm banana plug. Requires 8mm mounting hole.
£0.79
Add:
CN079
Panel mount. 15 Amp rated. For test equipment, power supplies, loudspeaker connection, etc. Accepts 4mm banana plug. Height:- 24-32mm above panel....
£1.51
Add:
