ST071
Triaxial accelerometer and gyroscope with 6 degrees of freedom. I2C serial interface. 5Vdc supply voltage - Arduino friendly. Applications available...
£2.75
Add:
QU328
Stereo power amplifier based on the PAM8403 class-D chip. 2.5-5V dc supply and highly efficient class of operation make this ideally suited to...
£0.61
Add:
M101
Stereo power amplifier based on the PAM8403 class-D chip. Module incorporates volume control with on/off switch at fully anti-clockwise rotation....
£1.06
Add:
M042
Enables interaction between different logic levels in the same system e.g. send 5V logic signals to 3.3V tolerant inputs. Signals can pass in both...
£0.58
Add:
M055
"Digital Tube" display module - 0.36" This module uses a two pin serial interface to accept display data to the onboard TM1637 IC. Customer Chris...
£1.57
Add:
M087
Charger module for 3.7V lithium power (LiPo) packs which do not include their own protection circuit. Feeds a 1A charge current to the battery and...
£1.00
Add:
M065
Input 8V - 36Vdc. Output 1.25V-32Vdc Constant max. output current can be varied up to 5A. 75W max. NOTE: To ensure correct current regulation and...
£2.54
Add:
M048
This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£5.33
Add:
M010
433MHz RF link modules for remote control applications. Widely used in Arduino based projects. Transmitter Specs: Voltage: 3.3V to 12V Range: 20m to...
£1.62
Add:
M062
USB-to-Serial converter based on the CP2102 chip. For debugging, firmware updating and general serial communications. Connects to PC via micro-USB...
£1.99
Add:
PCB013
Prototyping double-sided pad board fits the Wemos D1-Mini wi-fi board headers.
£0.52
Add:
M033
A low cost, accurate I2C real-time clock. with an integrated 32K AT24C32 EEPROM. Supply voltage 3.3 V to 5.5 V A coin cell battery holder allows...
£2.38
Add:
M072
Ethernet network adaptor module based on the ENC28J60 chip. SPI interface. 3.3V supply. Arduino compatible using a variety of available libraries...
£5.14
Add:
M084
Wi-fi and Bluetooth capable development board using the ESP-WROOM-32 chip. 32-bit dual core processor. Up to 240MHz with 512kB RAM. Peripherals...
£6.51
Add:
M117
A breakout board for the 30-pin ESP32 development module. Plug-in solderless connection for the ESP32 module. Provides screw terminal and male jumper...
£2.15
Add:
M038
Based around the ESP8266 ESP-12 and NodeMCU firmware this module provides an integrated Arduino-like hardware platform for developing wifi IoT...
£5.64
Add:
M028
Add Wi-fi and web capabilities to your project with this module which is currently in rapid development. The module operates at 3.3V, so level...
£1.99
Add:
M102
Asynchronous serial data transfer interface module.. Connects to PC via mini-USB socket. The 6-pin right angle pin header connects DTR, RX, TX, Vcc,...
£2.69
Add:
M026
Bluetooth communications module mounted on base board for easy plug-in connection and voltage regulation. Ideal for use in Arduino serial...
£5.14
Add:
ST053
HC-SR04-compatible RCWL16014-pin ultrasonic range finder. Detect the distance to objects in front of the sensor using an ultrasonic ping. 5V...
£1.68
Add:
M034
PIR motion sensor with high/low TTL 3.3V output signal. Sensitivity (up to 7m) and output duration (20s - 5min approx.) adjustable. 5V - 20V DC...
£1.82
Add:
M040
Bluetooth Low Energy communication module based on the CC2541 IC. Power supply - 3.6V-6Vdc Logic level - 3.3V. For communication with Arduino boards...
£6.92
Add:
M108
Dual Crystal HM10S Bluetooth Low Energy communication module based on the CC2541 IC. Surface mount module. Bluetooth version: V4.0 Connection...
£1.00
Add:
M047
IR Remote Control experimenters kit. This kit consists of a handheld remote control IR transmitter, receiver board and linking jumper wires for...
£1.81
Add:
ST089
A successor to the HC-SR04 with reportedly improved range (around 4.5m) and accuracy. Detect the distance to objects in front of the sensor using an...
£2.20
Add:
M088
2-channel H-bridge motor driver board able to drive two independent motors at up to 800mA each. Can also drive a single four line two phase stepper...
£1.13
Add:
M059
Input 3V - 40Vdc. Output 1.3V-35Vdc Rated output current 2A max continuous, 3A with additional heatsinking. Buck converter operating at 150kHz - max...
£1.00
Add:
M050
Card reader/writer interfaces directly with 5V Arduino ports using SPI. 4.5V-5.5V supply. Gnd, Vcc, MISO, MOSI, SCK & CS via 0.1" right angle header...
£1.04
Add:
M112
MP3-TF-16P Module. AKA DFPlayer Mini is a compact and inexpensive MP3 module with loudspeaker output. Can be used with a battery power supply,...
£1.40
Add:
M069
PIR motion sensor with operating in the 2.7V to 12Vdc supply range. Sensitivity 3-5m with output low to high for 2 secs on detection of motion....
£1.58
Add: