M119
The WCH-LinkE is a powerful debugging and programming tool designed for RISC-V and ARM-based microcontrollers. Ideal for both hobbyists and...
£5.59
Add:
M116
The W1209 thermostat is a compact and versatile digital temperature controller designed for controlling heating or cooling systems based on...
£2.89
Add:
M022
In-circuit programmer for AVR microcontrollers. Supplied with 6-way IDC lead for connection to the target. USB powered. Jumper in place sends 5V to...
£6.42
Add:
M008
In-circuit programmer for AVR microcontrollers. Linux, Mac OSX and Windows compatible. Supplied with 10-way IDC lead.
£4.55
Add:
M009
Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£8.49
Add:
M044
Input 0.9V - 5Vdc. Output 5Vdc @ 650mA max. via USB type A socket. Ideally suited to charger projects.
£0.74
Add:
M105
A high power, variable output, DC-DC boost converter. Input 35Vdc max via solder pads or screw terminals. Output 40V max via solder pads or screw...
£2.69
Add:
M104
A high power, variable output, DC-DC boost converter. Input 3V - 30Vdc. (5-30V for optimum operation) via solder pads. Output 35V max. Output voltage...
£2.18
Add:
M107
A 150W (max) DC-DC boost converter designed around the UC3843A PWM controller. Input 10-32Vdc max via screw terminals. Output 12-35Vdc @ 6A max. via...
£3.99
Add:
M060
Input 2V - 24Vdc. via solder pads or micro-USB socket. Output 28V max. Rated output current 2A max, 1A max continuous recommended, 3.5W approx. Buck...
£1.00
Add:
M082
DC buck converter module based on the MP2307 IC. Input 4.75V - 23Vdc. Output 1V-17Vdc Output variable by on board miniature preset potentiometer. Our...
£0.84
Add:
M014
Electret microphone with comparator circuit for sound detection. Power ON and sound detected LED indicators. Digital and analogue outputs....
£1.22
Add:
M035
A module for detecting moisture levels in soil. Ideal for experimenting with automatic watering systems and alarms. Consisting of a resistive...
£1.00
Add:
M110
Relay activation delay from power-up. When 12Vdc is applied to the module, a timer is started. At time-out, the relay is activated. Time adjustable...
£1.00
Add:
M081
4-Channel relay module. Inputs Gnd, Vcc (5Vdc), channel select signal 1-4 (active low). Channel signals are optically isolated from the relay coils....
£3.22
Add:
M115
4-Channel relay module. Inputs Gnd, Vcc (12Vdc), channel select signal 1-4. Channel activation HIGH/LOW selectable by jumper links - 5V logic...
£3.63
Add:
M064
Double relay module. Inputs Gnd, Vcc (5Vdc), channel 1 signal (active low), channel 2 signal (active low). Channel signals are optically isolated...
£2.83
Add:
M114
Double relay module. Inputs Gnd, Vcc (12Vdc), channel 1 signal, channel 2 signal. Channel activation HIGH/LOW selectable by jumper links - 5V logic...
£2.64
Add:
M017
Opto-isolated 10A Change-over Relay. On-board optocoupler circuit withrelay active led indicator. 3-way 0.1" pin header strip for 5Vdc supply and...
£2.00
Add:
M113
Opto-isolated 10A Change-over Relay. On-board optocoupler circuit withrelay active led indicator. 3-way connector block for 12Vdc supply and relay...
£2.00
Add:
ST096
Doppler effect motion sensor using microwave radar signals. Detection range up to 7m. Can detect motion through many materials. Wide 4-28Vdc supply...
£1.46
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.77
Add:
M049
I2C comms interface - address 0x48 Supply voltage 2.5V - 6Vdc. Onboard light sensor, thermistor and potentiometer connected to three ADC channels via...
£2.92
Add:
M095
Stereo power amplifier based on the PAM8610 class-D chip. 7-15V dc supply, input impedance 15k, 4 Ohm - 8 Ohm output impedance. 15W+15W into a 4 Ohm...
£2.06
Add:
M021
NRF24L01+ 2.4GHz Transceiver Module Data transfer up to 2Mbps. 125 Channels, Multi-point communication and frequency hopping to meet the...
£1.44
Add:
M023
Long Range NRF24L01+ 2.4GHz Transceiver Module 1000m range (line of sight) Data transfer up to 2Mbps. 125 Channels, Multi-point communication and...
£3.23
Add:
M061
Break out the Nano I/O to screw terminals. Nano pins push fit into central female headers. Board provided as a kit so soldering assembly is required....
£1.46
Add:
M057
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. Depending on current stock, this module may not have the header pins...
£4.63
Add:
MTR8
Motor voltage range 3-12Vdc (5V-9V recommended). 70-250mA Motor & gearbox dimensions 70 x 22 x 18mm approx. 70-140 rpm approx. Torque 1kgf.cm approx....
£2.46
... more info Sold Out
M085
Motor driver shield for Arduino - compatible with the Adafruit motor driver library. The board includes two L293D motor drivers and one 74HC595 shift...
£3.45
Add:
