M117
A breakout board for the 30-pin ESP32 development module. Plug-in solderless connection for the ESP32 module. Provides screw terminal and male jumper...
£2.15
Add:
M104
A high power, variable output, DC-DC boost converter. Input 3V - 30Vdc. (5-30V for optimum operation) via solder pads. Output 35V max. Output voltage...
£2.18
Add:
ST089
A successor to the HC-SR04 with reportedly improved range (around 4.5m) and accuracy. Detect the distance to objects in front of the sensor using an...
£2.20
Add:
M033
A low cost, accurate I2C real-time clock. with an integrated 32K AT24C32 EEPROM. Supply voltage 3.3 V to 5.5 V A coin cell battery holder allows...
£2.38
Add:
MTR8
Motor voltage range 3-12Vdc (5V-9V recommended). 70-250mA Motor & gearbox dimensions 70 x 22 x 18mm approx. 70-140 rpm approx. Torque 1kgf.cm approx....
£2.46
Add:
M065
Input 8V - 36Vdc. Output 1.25V-32Vdc Constant max. output current can be varied up to 5A. 75W max. NOTE: To ensure correct current regulation and...
£2.54
Add:
M114
Double relay module. Inputs Gnd, Vcc (12Vdc), channel 1 signal, channel 2 signal. Channel activation HIGH/LOW selectable by jumper links - 5V logic...
£2.64
Add:
M102
Asynchronous serial data transfer interface module.. Connects to PC via mini-USB socket. The 6-pin right angle pin header connects DTR, RX, TX, Vcc,...
£2.69
Add:
M105
A high power, variable output, DC-DC boost converter. Input 35Vdc max via solder pads or screw terminals. Output 40V max via solder pads or screw...
£2.69
Add:
ST071
Triaxial accelerometer and gyroscope with 6 degrees of freedom. I2C serial interface. 5Vdc supply voltage - Arduino friendly. Applications available...
£2.75
Add:
M064
Double relay module. Inputs Gnd, Vcc (5Vdc), channel 1 signal (active low), channel 2 signal (active low). Channel signals are optically isolated...
£2.83
Add:
M116
The W1209 thermostat is a compact and versatile digital temperature controller designed for controlling heating or cooling systems based on...
£2.89
Add:
M049
I2C comms interface - address 0x48 Supply voltage 2.5V - 6Vdc. Onboard light sensor, thermistor and potentiometer connected to three ADC channels via...
£2.92
Add:
M081
4-Channel relay module. Inputs Gnd, Vcc (5Vdc), channel select signal 1-4 (active low). Channel signals are optically isolated from the relay coils....
£3.22
Add:
M023
Long Range NRF24L01+ 2.4GHz Transceiver Module 1000m range (line of sight) Data transfer up to 2Mbps. 125 Channels, Multi-point communication and...
£3.23
Add:
M085
Motor driver shield for Arduino - compatible with the Adafruit motor driver library. The board includes two L293D motor drivers and one 74HC595 shift...
£3.45
Add:
M115
4-Channel relay module. Inputs Gnd, Vcc (12Vdc), channel select signal 1-4. Channel activation HIGH/LOW selectable by jumper links - 5V logic...
£3.63
Add:
M071
Clone of the Arduino Pro Mini with ATMega328P microcontroller operating at 3.3V 8MHz. 100% compatible. The Pro Mini was designed as a low cost...
£3.77
Add:
M107
A 150W (max) DC-DC boost converter designed around the UC3843A PWM controller. Input 10-32Vdc max via screw terminals. Output 12-35Vdc @ 6A max. via...
£3.99
Add:
M008
In-circuit programmer for AVR microcontrollers. Linux, Mac OSX and Windows compatible. Supplied with 10-way IDC lead.
£4.55
Add:
M057
Clone of the Arduino Nano 3.0 with ATMega328P microcontroller. 100% compatible. Depending on current stock, this module may not have the header pins...
£4.63
Add:
M072
Ethernet network adaptor module based on the ENC28J60 chip. SPI interface. 3.3V supply. Arduino compatible using a variety of available libraries...
£5.14
Add:
M026
Bluetooth communications module mounted on base board for easy plug-in connection and voltage regulation. Ideal for use in Arduino serial...
£5.14
Add:
M048
This clone of the Arduino Uno R3 uses a surface mount ATMega328P together with CH340G uart to handle the USB comms. 100% compatible and includes a...
£5.33
Add:
M119
The WCH-LinkE is a powerful debugging and programming tool designed for RISC-V and ARM-based microcontrollers. Ideal for both hobbyists and...
£5.59
Add:
M038
Based around the ESP8266 ESP-12 and NodeMCU firmware this module provides an integrated Arduino-like hardware platform for developing wifi IoT...
£5.64
Add:
M022
In-circuit programmer for AVR microcontrollers. Supplied with 6-way IDC lead for connection to the target. USB powered. Jumper in place sends 5V to...
£6.42
Add:
M084
Wi-fi and Bluetooth capable development board using the ESP-WROOM-32 chip. 32-bit dual core processor. Up to 240MHz with 512kB RAM. Peripherals...
£6.51
Add:
M040
Bluetooth Low Energy communication module based on the CC2541 IC. Power supply - 3.6V-6Vdc Logic level - 3.3V. For communication with Arduino boards...
£6.92
Add:
M009
Clone of the Arduino Uno R3. DIL socket mounted processor 100% compatible and includes a USB cable.
£8.57
Add: