Budget RF Link Pair

  • Model: M010

 Ask a Question 

£1.62

Add to Cart:
433MHz RF link modules for remote control applications.
Widely used in Arduino based projects.

Transmitter Specs:
Voltage: 3.3V to 12V
Range: 20m to 100m (Dependent on voltage/siting/obstructions/antenna)
Transmitting Power: 10mW
Dimensions: 19mm x 19mm
Pinout: Data, Vcc, GND
Wire antenna can be soldered to the pad top right.

Receiver Specs:
Voltage: 5V
Frequency: 433.92MHz
Current: 4mA
Dimensions: 30mm x 13mm x 9mm (WxDxH) Pinout: VCC, DATA, DATA, GND
Wire antenna can be soldered to the pad next to the coil (lower left).
Note: the two data pins are connected together on the pcb.
Your IP Address is: 3.94.202.151
Copyright © 2024 Bitsbox. Powered by Zen Cart