Vemuram Jan Ray Clone

  • Model: K097

 Ask a Question 

£16.40

Add to Cart:
"A firm natural overdrive with a pleasant silky sustain. An easy to handle overdrive with great sustain without any unnatural compression. It keeps the characteristics of the tones that the guitars naturally produce. The Jan Ray reproduces that great sustaining punchy clear tones of the blackface Fender amps from the 60's. The tone is crispy yet the low is warm and mellow."

A kit of components as recommended by Ivlark for assembly of the Vemuram Jan Ray stripboard project.
NOTE - these kits are not intended for beginners, so the ability to identify components and values from their markings and to transfer a pictorial layout to physical stripboard is assumed. No written instructions are provided with the kit.
Details and layout available here.



Manufacturers and product names are mentioned solely for circuit identification and comparison, and where applicable the trademarks are the property of their respective owners who are in no way associated or affiliated with Bitsbox. No cooperation or endorsement is implied.

Kit Contents:
  • Resistors:
    • 1x 100R Metal Film Resistor 0.25W 1%
    • 1x 680R Metal Film Resistor 0.25W 1%
    • 1x 1k2 Metal Film Resistor 0.25W 1%
    • 3x 3k3 Metal Film Resistor 0.25W 1%
    • 1x 7k5 Metal Film Resistor 0.25W 1%
    • 2x 9k1 Metal Film Resistor 0.25W 1%
    • 2x 1M Metal Film Resistor 0.25W 1%
  • Capacitors:
    • 1x 39nF Polyester Film
    • 2x 47nF Polyester Film
    • 1x 1uF Polybox
    • 1x 1uF Multilayer Ceramic
    • 2x 47uF 25V Electrolytic
    • 1x 22pF Ceramic Disc
    • 1x 47pF Ceramic Disc
    • 1x 150pF Ceramic Disc
    • 1x 100nF Ceramic Disc
  • 5x 1N4148 Diode
  • 1x MC1458 Dual Op Amp
  • 1x 470k lin 16mm Potentiometer
  • 1x 47k lin 16mm Potentiometer
  • 2x 10k lin 16mm Potentiometer
  • 1x 10k 6mm Cermet Preset
  • 1x 64x95mm Stripboard
  • 1x 3PDT Footswitch
  • 1x 2.1mm DC Chassis Socket
  • 1x DPDT Min Toggle Switch
Note: Some components from the original design may have been replaced by recommended substitutes - more information available via the blog here.

To complete your project you might be interested in:

Wire diecast box jack socket control knobs switch
Your IP Address is: 18.97.9.172
Copyright © 2024 Bitsbox. Powered by Zen Cart