Son of Clay Jones Overdrive Clone

  • Model: K119

 Ask a Question 


Add to Cart:
"The venerable Clay Jones Overdrive gets the Lovepedal Eternity treatment by Fred Briggs. The ultimate mojo Tubescreamer gets a bit more mojo"

A kit of components as recommended by Ivlark for assembly of the Son of Clay Jones Overdrive inspired stripboard pedal project.

NOTE - these kits are not intended for beginners, so the ability to identify components and values from their markings and to transfer a pictorial layout to physical stripboard is assumed. No written instructions are provided with the kit.
Details and layout available here.

Manufacturers and product names are mentioned solely for circuit identification and comparison, and where applicable the trademarks are the property of their respective owners who are in no way associated or affiliated with Bitsbox. No cooperation or endorsement is implied.

Kit Contents:
  • Resistors:
    • 1x 220R Metal Film Resistor 0.25W 1%
    • 4x 1k Metal Film Resistor 0.4W 1%
    • 1x 4k7 Metal Film Resistor 0.25W 1%
    • 3x 10k Metal Film Resistor 0.4W 1%
    • 1x 510k Metal Film Resistor 0.4W 1%
    • 1x 1M Metal Film Resistor 0.4W 1%
  • Capacitors:
    • 1x 22nF Polybox
    • 2x 220nF Polybox
    • 1x 220nF Polyester Film
    • 1x 1uF Multilayer Ceramic
    • 1x 47pF Ceramic Disc
    • 1x 47uF 16V Electrolytic
    • 1x 100uF 16V Electrolytic
  • 1x OPA2134
  • 2x 3mm Red LED
  • 1x 22k lin 16mm Potentiometer
  • 1x 100k Lin 16mm Potentiometer
  • 1x 1M Log 16mm Potentiometer
  • 1x 64x95mm Stripboard
  • 1x 3PDT Footswitch
  • 1x 2.1mm DC Chassis Socket
  • Note: Obsolete or non-standard value components will have been replaced by currently available recommended substitutes or standard European equivalent values - more information available via the blog here.

    To complete your project you might be interested in:

    Wire diecast box jack socket control knobs switch
Your IP Address is:
Copyright © 2024 Bitsbox. Powered by Zen Cart