FD II Mosfet V2 Clone

  • Model: K120

 Ask a Question 

£27.24

Add to Cart:
Build the tagboardeffects.blogspot.co.uk stripboard take on Fulltone's most popular circuit - a souped up Tubescreamer on steroids.

A kit of components as recommended by Ivlark for assembly of his FD II Mosfet-inspired stripboard project.
NOTE - these kits are not intended for beginners, so the ability to identify components and values from their markings and to transfer a pictorial layout to physical stripboard is assumed. No written instructions are provided with the kit.
Latest assembly guides and layout are available here.


Manufacturer and product names are mentioned solely for circuit identification and comparison, and where applicable the trademarks are the property of their respective owners who are in no way associated or affiliated with Bitsbox. No cooperation or endorsement is implied. The kit does not purport to be a replica of, nor replacement for the original circuit board and is intended as a basis for guitar-playing electronics hobbyists wanting to build and customise their own pedal.

Kit Contents:
  • Resistors:
    • 1x 100R Metal Film Resistor 0.25W 1%
    • 1x 220R Metal Film Resistor 0.25W 1%
    • 4x 1k Metal Film Resistor 0.4W 1%
    • 1x 4k7 Metal Film Resistor 0.4W 1%
    • 6x 10k Metal Film Resistor 0.4W 1%
    • 2x 22k Metal Film Resistor 0.25W 1%
    • 1x 47k Metal Film Resistor 0.4W 1%
    • 1x 82k Metal Film Resistor 0.25W 1%
    • 2x 510k Metal Film Resistor 0.25W 1%
    • 1x 1M Metal Film Resistor 0.25W 1%
  • Capacitors:
    • 2x 10uF 16V Electrolytic
    • 2x 100uF 16V Electrolytic
    • 1x 10pF Ceramic Disc
    • 1x 47pF Ceramic Disc
    • 1x 10nF Polybox
    • 2x 100nF Polybox
    • 1x 22nF Polybox
    • 2x 220nF Polybox
    • 2x 1uF Polybox
  • 1x 1N4148 Diode
  • 3x 1N4001
  • 2x 2N5088 Transistor
  • 2x 2N7000 Fet
  • 1 x 4558 Dual Opamp
  • 1x 22k lin 16mm Potentiometer
  • 1x 100k log 16mm Potentiometer
  • 1x 500k log 16mm Potentiometer
  • 1x 1M lin 16mm Potentiometer
  • 1x On-On-On Toggle Switch
  • 1x SPDT Toggle Switch
  • 1x 64x95mm Stripboard
  • 2x 3PDT Footswitch
  • 1x 2.1mm DC Chassis Socket
Note: Obsolete components will have been replaced by currently available recommended substitutes - more information available via the blog here.

To complete your project you might be interested in:

Wire diecast box jack socket control knobs switch
Your IP Address is: 18.97.9.175
Copyright © 2024 Bitsbox. Powered by Zen Cart